• 公众号
    微信扫码快速关注
  • 优秀毕业设计精选
    分享网站给同学朋友一起完成毕业设计
    毕业个人简历下载
    土木毕设网

    某6层商务综合办公楼建筑结构设计(计算书+图纸)[面积7000]

    资料分类:土木工程设计资料 - 建筑结构毕业设计范文参考资料 | 发布形式:资料共享 | 更新时间:2015-10-29 显示全部楼层

    毕设基本摘要

    建筑面积:7000m2
    建筑层数:6层
    建筑高度:24.62m
    结构类型:框架结构
    文件内容:计算书+图纸


    摘   要


    本毕业设计的课题是南京市视觉艺术学校商务综合办公楼建筑结构设计,旨在使毕业生进一步了解和掌握结构设计的一般方法和步骤,巩固和检验所学的理论知识,提高分析问题和解决问题的能力。
    本工程的建筑设计主要有:商务综合办公楼的平面整体呈展翅的蝴蝶形,建筑占地面积约为2000m2,总建筑面积约为7000m2,共六层,底商两层,层高4.2m,教学与办公区共四层,层高3.6m。楼层的总高度为24.62m。一至二层为购物商场,三至六层为学校教室或办公室等。
    本工程的结构设计主要有:在确定框架布局与计算简图后,先进行了屋面板和楼面板的设计计算,然后进行结构方案中的楼梯的设计,完成了楼梯平台板、梯段板、平台梁的内力与配筋计算,接着进行层间荷载代表值得计算,然后利用顶点位移法求出结构的自震周期,并计算了水平地震作用下框架的内力,接着进行了框架在竖向荷载作用下的内力分析并完成内力组合,找出一组最不利的内力工况进行设计,最后完成基础的设计。
    整个设计完全符合要求。


    关键词:建筑设计、结构设计、框架

    Abstract

        The subject of this graduation project is the Architecture and Structure Design of Visual arts school in Nanjing integrated office and business building.The propose is to make graduate students know and master the step and methods of construction design ,solid and examine the theories ,improve the abilities of analyzing problem and solving problem.
        The architectural design of the project including: The flat of this building likes the shape of butterfly wings. The building covers an area of approximately 2000m2,and a total construction area of about 7000m2.The building havs six floors. The height of the first and second floors in the demersal part of building is 4.2m. And the height of the other four floors is 3.6m and the total height of the building is 24.62m. For one to two is shopping malls, and three to six for the school classroom or office.
    The structural design of the project including: When we determinate the directions of the frame and the model for calculation ,design the slab of proof and the slab of floor. Then design the stairs is also be approached by calculating the internal force and reinforcing components such as landing slab , step board and landing girder. We also should calculate the weight of each floor , then the vibrate cycle is calculate by utilizing the peak-displacement method. The internal force in the structure under the horizontal loads and the dead loads can be calculate, and then we should integrate the internal force and choose the most adverse state which is based by designing.   
    The design needs the requirements completely.

    Keywords: Architectural Design   Structural Design   Framework

    计算书部分内容展示
    建筑结构毕业设计-某6层商务综合办公楼建筑结构设计(计算书+图纸)[面积7000](1) 毕业设计.pdf (3.66 MB, 下载次数: 12)

    部分图纸截图
    建筑结构毕业设计-某6层商务综合办公楼建筑结构设计(计算书+图纸)[面积7000](2) 建筑结构毕业设计-某6层商务综合办公楼建筑结构设计(计算书+图纸)[面积7000](3) 建筑结构毕业设计-某6层商务综合办公楼建筑结构设计(计算书+图纸)[面积7000](4) 建筑结构毕业设计-某6层商务综合办公楼建筑结构设计(计算书+图纸)[面积7000](5) 建筑结构毕业设计-某6层商务综合办公楼建筑结构设计(计算书+图纸)[面积7000](6)

    文件列表截图
    建筑结构毕业设计-某6层商务综合办公楼建筑结构设计(计算书+图纸)[面积7000](7)

    全套毕设下载

    在线内容试读展示已结束,下载资料使用学习更方便

    全部评论 已有7条评论 发表评论
    资料为会员分享仅供学习交流,如有侵权请通知删除
    在线学习土木工程毕业设计做法

    热门分类

    最新资料